Home » Products » Industrial Pipes & Tubes » API 5lx65 pipe » API 5L X46 PSL 2

API 5L X46 PSL 2 at Factory Rate
API 5L X46 PSL 2

API 5L X46 PSL 2

Looking for API 5L X46 PSL 2 of API standard Carbon Steel Line Pipe & customize size at Factory Rate?

We are manufacturer, exporter & suppliers of API 5L X46 PSL 2 and supply high quality API 5L X46 PSL 2 in both large and small quantities worldwide & offer you the best prices in the market. We at Himesh Steel have a team of experienced professionals with years of experience in manufacturing.



Content Link:

 

API 5L X46 PSL 2 Usage

American Petroleum Institute standard 5L. API pipes & API 5L X46 PSL 2 are exclusively used for transmission of gas and petroleum products.

 

API 5L X46 PSL 2 Packaging & Shipping

Packed API 5L X46 PSL 2 in Pipe Factory

Packed API 5L X46 PSL 2

Packed API 5L X46 PSL 2 in Pipe Factory

Packed API 5L X46 PSL 2

 

Plastic closes both ends, Hexagonal bundles maximum 2.000 kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and IN in sackcloth with several steel strips, Plastic caps.

Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. We can also offer customized packaging for API 5L X46 PSL 2 as per customer's requirement.

Overseas Packaging

Export packaging is geared towards the protection, handling and transport of API 5L X46 PSL 2 by air or sea freight and, as such, shares many characteristics with export and transport packaging. Utmost care must also be taken to make overseas packaging suitable for long periods of storage. It is important for overseas packaging to be designed with ease of handling in mind, so as to ensure API 5L X46 PSL 2 is treated with the utmost care at all times.

API 5L X46 PSL 2 Price

Carbon Steel Seamless Pipe API 5L X46 PSL 2
FOB Price: US $400-700 / Metric Ton

ERW steel pipe API 5l x46 psl 2
FOB Price: US $700-1000 / Ton

line pipe API 5L PSL 2 X46
FOB Price: US $500-1300 / Ton

Supplemental Comparison Tables for API 5L X46 PSL 2

Supplemental Comparison Tables for API 5L GR.B PSL 2

44th

a For intermediate grades, the difference between the specified maximum yield strength and the specified minimum yield strength
shall be as given in the table for the next higher grade, and the difference between the specified minimum tensile strength and the
specified minimum yield strength shall be as given in the table for the next higher grade. For intermediate grades lower than Grade L555
or X80, the tensile strength shall be <= 760 MPa (110 200 psi). For intermediate grades higher than Grade L555 or X80, the maximum
permissible tensile strength shall be obtained by interpolation. For SI units, the calculated value shall be rounded to the nearest 5 MPa.
For USC units, the calculated value shall be rounded to the nearest 100 psi.

43rd b Maximum yield strength for an intermediate grade shall be the maximum for the next higher listed grade.
43rd C All intermediate grades have a maximum ultimate tensile strength of 110,000 psi (758 MPa).r
44th
43rd
b For grades > L625 or X90, Rp0,2 applies.
44th
43rd
C This limit applies for pipe with D > 323,9 mm (12.750 in).
44th
43rd
d For intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a).
44th
43rd
e For pipe requiring longitudinal testing , the maximum yield strength shall be <= 495 MPa (71 800 psi).
44th
f The specified minimum elongation, Af, expressed in percent and rounded to the nearest percent, shall be as determined using the following equation:
A f = - - -
where C is 1 940 for calculations using SI units and 625 000 for calculations using USC units; - - -
43rd a The minimum elongation in 2 in. (50.8 mm) shall be that determined by the following equation:
e = - - -
where C is 1 944 for calculations using SI units and 625 000 for calculations using USC units; - - -
  g Lower Rt0,5 / Rm ratio values may be specified by agreement for L690 or X100 and L830 or X120 pipe.

Note that this document is not intended to replace the standards but rather as a tool to facilitate
comparison between standards

Other Useful Info

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum CARBON EQUIVALENT a
% MAXIMUM
Cb Si Mnb P S V Nb Ti Other CEIIW CEPcm
SEAMLESS & WELDED PIPES
L320N or X46N 0.24 0.4 1.2 0.025 0.015 0.07 0.05 0.04 e 0.43 0.25
L320Q or X46Q 0.18 0.45 1.4 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25
WELDED PIPE
L290M OR X42M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 e 0.43 0.25

MECHANICAL REQUIREMENTS
Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
320 (46 400) 435 (63 100) f

IMPACT TEST
AVG. ABSORBED ENERGY IND. ABSORBED ENERGY
Min.(joules) Min.(joules)
27 20

 

Our Inventory

API 5L available ex-stock

Also check our carbon steel inventory

Shipping Worldwide :

We import & export to:

 

 

Share this page

Language Translator

Quick Enquiry Form

Quick Contact

HIMESH STEEL & ALLOYS
Office No 29, Habib Building, 2nd Floor, 
2nd Panjarapole Lane, C. P. Tank, 
MUMBAI – 400 004, India

Tel: +91-22-66393969 / 67496348
Cell: +91-92222211080 / 9920378883
Fax: +91-22-67496348
Email:sales.himeshsteel@gmail.com
info@himeshsteel.com
sales@himeshsteel.com
pmshah@himeshsteel.com
Website: www.himeshsteel.com

Calculator