API 5L GR.B PSL 2
Looking for API 5L GR.B PSL 2 of API standard Carbon Steel Line Pipe & customize size at Factory Rate?
We are manufacturer, exporter & suppliers of API 5L GR.B PSL 2 and supply high quality API 5L GR.B PSL 2 in both large and small quantities worldwide & offer you the best prices in the market. We at Himesh Steel have a team of experienced professionals with years of experience in manufacturing.
Content Link:
- • API 5L GR.B PSL 2 Specification
- • API 5L GR.B PSL 2 Usage
- • API 5L GR.B PSL 2 Packaging & Shipping
- • API 5L GR.B PSL 2 Price
- • Supplemental Comparison Tables for API 5L GR.B PSL 2
- • Other Useful Info
- • Our Inventory
API 5L GR.B PSL 2 Usage
American Petroleum Institute standard 5L. API pipes & API 5L GR.B PSL 2 are exclusively used for transmission of gas and petroleum products.
API 5L GR.B PSL 2 Packaging & Shipping
Packed API 5L GR.B PSL 2
Packed API 5L GR.B PSL 2
Plastic closes both ends, Hexagonal bundles maximum 2.000 kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and IN in sackcloth with several steel strips, Plastic caps.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. We can also offer customized packaging for API 5L GR.B PSL 2 as per customer's requirement.
Overseas Packaging
Export packaging is geared towards the protection, handling and transport of API 5L GR.B PSL 2 by air or sea freight and, as such, shares many characteristics with export and transport packaging. Utmost care must also be taken to make overseas packaging suitable for long periods of storage. It is important for overseas packaging to be designed with ease of handling in mind, so as to ensure API 5L GR.B PSL 2 is treated with the utmost care at all times.
API 5L GR.B PSL 2 Price
API 5L GR.B PSL 2 Seamless Pipe
FOB Price: US $600-700 / Metric Ton
API 5L Gr.B PSL 2 pipeline
FOB Price: US $600-700 / Metric Ton
API 5L Gr.B PSL 2 NACE, H2S, SOUR, HIC SSCC pipe
FOB Price: US $500-6000 / Ton
API 5L GR.B PSL 2 FBE Anticorrosion Line Pipes Bare & Coated
FOB Price: US $600-800 / Metric Ton
4" ELBOW; CARBON STEEL; API 5L GR.B X65 PSL 2 SEAMLESS RADIUS 5XNPS
FOB Price: US $0.1-500 / Piece
Supplemental Comparison Tables for API 5L GR.B PSL 2
| 44th |
a For intermediate grades, the difference between the specified maximum yield strength and the specified minimum yield strength |
| 43rd | b Maximum yield strength for an intermediate grade shall be the maximum for the next higher listed grade. |
| 43rd | C All intermediate grades have a maximum ultimate tensile strength of 110,000 psi (758 MPa).r |
| 44th 43rd |
b For grades > L625 or X90, Rp0,2 applies. |
| 44th 43rd |
C This limit applies for pipe with D > 323,9 mm (12.750 in). |
| 44th 43rd |
d For intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a). |
| 44th 43rd |
e For pipe requiring longitudinal testing , the maximum yield strength shall be <= 495 MPa (71 800 psi). |
| 44th |
f The specified minimum elongation, Af, expressed in percent and rounded to the nearest percent, shall be as determined using the following equation: A f = - - - where C is 1 940 for calculations using SI units and 625 000 for calculations using USC units; - - - |
| 43rd | a The minimum elongation in 2 in. (50.8 mm) shall be that determined by the following equation: e = - - - where C is 1 944 for calculations using SI units and 625 000 for calculations using USC units; - - - |
| g Lower Rt0,5 / Rm ratio values may be specified by agreement for L690 or X100 and L830 or X120 pipe. |
Note that this document is not intended to replace the standards but rather as a tool to facilitate
comparison between standards
Other Useful Info
Chemical composition(%) API 5L PSL2 Gr.B
API 5L X60 PSL 1 Seamless pipe
| Grade | C | Mn | P | S | Si | V | Nb | Ti | CEpcm |
| (max) | (max) | (max) | (max) | (max) | (max) | (max) | (max) | (max) | |
| B | 0.24 | 1.2 | 0.025 | 0.015 | 0.4 | c | c | 0.04 | 0.25 |
API 5L PSL2 Gr.B Welded pipe
| C | Mn | P | S | V | Nb | Ti | |
| maxb | max.b | min. | max. | max. | max. | max. | max. |
| 0.26e | 1.40e | - | 0.03 | 0.03 | f | f | f |
Mechanical requiremnts of API 5L PSL2 Gr.B
| Grade | Yield Strength (Mpa) | Tensile Strength (Mpa) |
| API 5L PSL2 Gr.B | 245-450 | 415-760 |
- 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
- For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%.
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
- The sum of the niobium ,vanadium and titanium concentratons shall be <=0.06%.
- Unless otheriwse agreed.
- Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be
Our Inventory
API 5L available ex-stock
Also check our carbon steel inventory
Shipping Worldwide :
We import & export to: